precautions for the use of dust collectors include rack, motor, fan, electric control box, dust filter bag, door, vibration motor, vibration mechanism, hopper, dust hopper, dust door and dust filter rack, rack includes upper shell and lower shell, motor and fan are arranged in the upper shell, precautions for the use of dust collectors The dust filter bag, the hopper and the dust receiving hopper are arranged in the lower shell, the dust filter is installed between the upper shell and the lower shell, the dust filter bag is connected with the dust filter frame, the elastic sealing pad is arranged between the frame and the dust filter frame, the vibration motor is connected with the dust filter frame through the vibration mechanism, the air inlet is arranged on the side of the lower shell, the air outlet is arranged above the upper shell, the motor and the vibration motor are respectively connected with the electric control box. The dust collector has the characteristics of compact structure, easy operation, low noise, good dust removal effect, and can be directly applied to small places and laboratories.
Below, explain the design requirements for precautions for the use of dust collectors in detail:
1. After the box, bag room, inlet and outlet, ash hopper and other equipment, all the joints should be airtight, requiring welding and sealing, implementing airtight welding, connecting with fasteners, with sealing gaskets, and tightening all fasteners. For part of the air leakage, silicone or epoxy resin is applied to stop the leakage rain. the sealing of the dust collector is an important factor affecting the normal operation and life, and the precautions for the use of dust collectors require that the air leakage rate is less than 3%.
Second, when assembling the gas route part, the main gas pipe has been made in the factory, and the site only needs to be assembled. The control gas pipe (connecting the lifting valve cylinder) should be unloaded, cased and other equipment on the site, requiring all pipelines to be organized and clean, without any debris, all joints should be filled with sealing materials, and the pressure test does not leak.
Third, the equipment bag cage and filter bag is a careful and careful operation of all equipment, so it should be placed in the final equipment, equipment, filter bag must not bump with sharp objects, hook and scratch, even small scratches, will shorten the life of dust filter bag. The method of filter bag is to first put the dust bag into the bag room by the box flower plate hole, and then pinch the spring ring at the top of the bag mouth into a concave shape, put it into the box flower hole plate, and then restore the spring ring, so that it is tightly pressed on the circle of the flower hole, and finally the bag cage is gently pierced from the bag mouth until the upper cover of the bag cage is indeed pressed on the box inside the flower plate hole to stop. In order to avoid damage to the filter bag, it is required to install a dust removal skeleton for each filter bag. Filter bag, dust bag cage and flower hole plate equipment.
Fourth, after the bag cage with the precautions for the use of dust collectors is installed, the equipment should also be pressed, so that the ground line, bag cage and flower plate on the filter bag can be tightly touched. The door on the air box pulse bag dust collector for coal mill does not need to be adjusted when the equipment has been adjusted before leaving the factory.
precautions for the use of dust collectors In lifting should pay attention to avoid deformation, in the equipment factory, the key components are welded with lifting lug, please use lifting lug for lifting.
precautions for the use of dust collectors https://www.kaisenfilter.com/Dust-Collector-Precautions.html
